MARTINICO & SONS ยท SAN JOSE, CALIFORNIA

San Jose HVAC
Questions, Answered

Family-owned since 1956, Martinico & Sons has heated, cooled and ventilated San Jose homes and businesses for three generations. Here are straight answers to the questions we hear most. If you don’t see yours, call us at 408-264-5717.

1956

Family-owned since 1956.
Three generations of service.
Homes and businesses.

About Martinico & Sons

A San Jose family business since 1956.

The Martinico family has served San Jose since 1956. We’re a third-generation, family-owned and operated HVAC company at 1776 S. 7th Street in San Jose, and we hold one of the oldest HVAC licenses issued in the Bay Area.
Yes. California State License Board (CSLB) license #163059, classifications C-20 (Heating, Ventilating and Air Conditioning) and C-43 (Sheet Metal). You can verify our license at cslb.ca.gov. We’re also a BBB-accredited business. View our licenses and certifications.
San Jose and the surrounding South Bay and Peninsula, including Willow Glen, Almaden, Cambrian Park, Blossom Valley, Santa Teresa, Evergreen, Alum Rock, Campbell, Los Gatos, Saratoga, Cupertino, Santa Clara and Sunnyvale. Not sure if you’re in our area? Give us a call. Explore our service areas.
Both. We handle residential heating and air conditioning, and commercial HVAC, including design-build projects, commercial kitchen ventilation, and custom sheet-metal and stainless-steel fabrication.
Our office is open Monday through Friday, 8:00 am to 5:00 pm. Members of our Membership Program get priority scheduling.

Heating problems

Practical first steps, and when to call a technician.

Before you call, check these:
  1. Thermostat: set to HEAT, set a few degrees above room temperature, and replace the batteries if the screen is blank.
  2. Power: check the furnace breaker in your panel and the light-style switch on or near the furnace. Do not keep resetting a breaker that trips.
  3. Furnace door: the front panel must be fully closed. A safety switch keeps the furnace off if the panel is loose. Never bypass a safety switch.
  4. Air filter: a badly clogged filter can make the furnace overheat and shut itself off.
If it still won’t start, call us. Ignition, flame-sensor and control-board problems need a technician. Schedule furnace repair.
The usual causes are a thermostat fan set to ON instead of AUTO, a dirty filter tripping the overheat safety, a dirty flame sensor, or an ignition problem. On a heat pump, a short burst of cool air during a defrost cycle is normal. Air that stays cool is not. If changing the fan setting and the filter doesn’t fix it, schedule a repair.
This is called short cycling. Common causes are a clogged filter, a dirty flame sensor, a poorly placed thermostat, blocked vents or returns, or a system that’s too big for the home. Short cycling wears out parts and wastes energy, so have it checked.
That light is a diagnostic code. Count the flashes and match the count to the manufacturer’s diagnostic chart or owner’s manual. Carrier, Lennox, Goodman, Rheem, Trane and others each use their own codes. Write down the code before you call us so our technician can prepare for your visit. Please don’t keep resetting the furnace, because some codes mean a safety lockout. Leave internal inspection and repairs to a technician.
On older furnaces, wall heaters and water heaters, a pilot that won’t stay lit usually means a worn thermocouple, a dirty pilot assembly or a draft problem. If you smell gas, don’t relight anything or operate switches. Leave the building immediately. Once safely away, call 911, then PG&E at 1-800-743-5000. Follow PG&E’s gas safety guidance. If there is no gas smell, arrange a professional inspection.
If you smell gas, see smoke or fire, or your carbon monoxide alarm sounds, leave the building immediately and call 911 from a safe location. For a suspected gas leak, also call PG&E at 1-800-743-5000. Do not re-enter until emergency responders say it is safe. For other problems such as a breaker that keeps tripping, persistent burning smells, loud banging or screeching, or water pooling around the unit, stop using the system and arrange professional service. Read carbon monoxide safety guidance.
Yes. We install and repair central heat pumps and ductless mini-split systems from major brands including Mitsubishi, Daikin, Carrier and Lennox. Learn about our residential HVAC services.

Maintenance & membership

Keep your system ready for the next season.

For most homes, twice a year: in spring before cooling season and in fall before heating season. Commercial systems that run all the time, like restaurants and larger buildings, should be serviced four times a year. Regular tune-ups catch small problems early, keep efficiency up, and help protect your manufacturer warranty. A maintenance visit is $70 through December 31, 2026. Explore maintenance and membership options.
Members get two precision tune-ups a year, each with a full system inspection, performance testing, airflow and safety checks, a filter check, an electrical and component review, and calibration for efficiency. Members also get priority service, discounted repair rates, reduced diagnostic fees, and a service history that helps plan your system’s future. See our Membership Program page for details.
This will vary depending on the size and quantity of equipment you have. We offer monthly and annual plans. Call 408-264-5717 or visit our Membership Program page for current pricing and to sign up.
For most 1-inch filters, every 1 to 3 months. Change it more often if you have pets or allergies, or during Bay Area wildfire-smoke season.

Repair, replacement & local requirements

Understand your options before making a decision.

Replacement is worth considering when the furnace is 15 to 20 years old, the air conditioner is 10 to 15 years old, repairs are getting frequent, a single repair would cost a large share of a new system’s price, or an older AC still uses R-22 refrigerant. We’ll give you an honest recommendation either way. We’ve built our reputation on repairs as much as installations. Explore service and repair options.
It depends on the home’s size, ductwork, equipment type and whether an electrical upgrade is needed. San Josรฉ Clean Energy puts the average cost of a heat pump system for a single-family home in San Jose at about $15,000 to $22,700 before incentives, including equipment, installation and permits. A panel upgrade, if needed, adds roughly $3,000 to $5,000. These are general planning figures, not a Martinico & Sons quote. We’ll give you a free written estimate for new equipment after an in-home assessment.
Yes. The City of San Josรฉ requires a mechanical permit to install or replace furnaces, air conditioners, heat pumps and ductwork. State Title 24 energy rules may also require third-party testing. As a licensed contractor, we pull the permit and coordinate inspections for you. Be careful with anyone who offers to skip the permit. Unpermitted work can cause problems with insurance and when you sell your home.
You do not have to remove a working gas furnace. Under the Bay Area Air District’s adopted rules, the zero-NOx standard for covered furnaces is scheduled for units manufactured on or after January 1, 2029. Electric heat pumps are a common replacement option. Separate residential water heater requirements were delayed to January 1, 2028, with exemptions and different timelines for some properties and equipment. Requirements can change, so check the Air District’s current rules when planning a replacement. We’ll walk you through the options for your property.
For most homes, yes. San Jose’s mild winters are well suited to heat pumps, and one system handles both heating and air conditioning. Heat pumps also pair well with solar. Some homes need an electrical panel upgrade, which we’ll check during your assessment. Request a home assessment.
San Josรฉ Clean Energy (SJCE) offers EcoHome rebates to eligible customers for heat pump HVAC, heat pump water heaters and related upgrades like panel work. Amounts and availability change, so check the current offers. The federal Energy Efficient Home Improvement Credit (25C) is no longer available for equipment placed in service after December 31, 2025. We’ll help you review potential rebates and provide supporting project paperwork. EcoHome applications must be submitted by the PG&E account holder.
New equipment is covered by the manufacturer’s parts warranty, typically 5 to 10 years depending on the brand and model. We also back our installation work with a 1-year labor warranty.
We work with all the major brands, including Carrier, Lennox, Daikin and Mitsubishi, and we’ll recommend the right equipment for your home or building, not just the one we have in stock.

Indoor air quality & ductwork

Cleaner air and better airflow at home or work.

Start with a higher-rated filter (MERV 13 if your system can handle it), sealed ductwork, and ventilation appropriate to outdoor air quality. During wildfire smoke, avoid bringing smoky outdoor air inside. We also install whole-home air purification and filtration systems. See our Indoor Air Quality page.
Yes. We hold a C-43 Sheet Metal license and fabricate, repair and replace residential and commercial ductwork. Leaky ducts can waste a significant share of the air your system heats or cools. Ask about ductwork service.

Commercial HVAC

From ongoing maintenance to custom fabrication.

Yes. We design, fabricate and install commercial kitchen hood and exhaust systems, along with stainless-steel counters and custom fabrication. Explore commercial services.
Yes. We handle commercial HVAC from design through installation, and we offer preventative maintenance agreements to keep your building running. Learn about commercial HVAC.
Yes. We’re certified to install 3M Fire Barrier Duct Wrap. View our licenses and certifications.

Getting started

Tell us what you need. We’ll help with the next step.

Call 408-264-5717 Monday through Friday, 8 am to 5 pm, email info@martinicoandsons.com, or use our contact form. Tell us your equipment brand, any error code and what you’re noticing, and we’ll be ready when we arrive.
Yes, estimates for new equipment are free. Repair and diagnostic visits have a diagnostic fee, and Membership Program members get a reduced rate. Request an estimate.

Still have a question?

Talk with our San Jose team. Monday through Friday, 8 am to 5 pm.

Information reviewed November 16, 2026. Rebates, regulations and equipment costs may change. The $70 maintenance visit special ends December 31, 2026.